An HP convertible with LTE might be the Nocturne Chromebook: A twist on the Chromebook X2

Some interesting FCC filings over the past few days have me intrigued. Although up to now I’ve been expecting Google to release both a Pixelbook 2 and some other detachable Chromebook at its hardware event on October 9, based on the filings it’s possible that other hardware partners may have new devices as well. The codenames Atlas and Nocturne are contenders for new Chromebooks, although there’s been more code work on Nocturne than the 4K Atlas device.

Based on the FCC filings, there’s a reasonable chance that Nocturne is the next convertible Chromebook and it could be made by HP. Let me explain.

Above you’ll see a schematic of an upcoming HP convertible that was recently tested by the FCC for Bluetooth, Wi-Fi and LTE bands. When I first saw it, I thought it had a Microsoft Surface-like hinge on the left and right that allowed a stand to fold outward. I was close, but not quite right.

These drawings of the FCC testing — it tests radio waves in both tablet and laptop configurations for convertible devices, tell a different story. It appears that the HP device under test has an attachable keyboard cover, although these are likely renderings.

This device appears similar to the HP Chromebook X2 because the tablet mode image shows a hinge on the right side of the picture and the display is detached. Here’s a side view of the HP Chromebook X2 for comparison, where you case the same, or a similar, hinge mechanism:

In fact, I’m wondering if Nocture is essentially a slightly revised Chromebook X2 with an optional thin keyboard cover using pogo pins for the attachment. That would provide a lighter device when leaving the base behind but still offer the productivity of a full, light keyboard.

This is all even more interesting when combined with another few tidbits in filings and in the Chromium OS code commit logs.

The FCC test result documents make mention that that HP device uses three hall sensors to detect which mode the device is in. Wi-Fi transmission power is reduced when the HP is in tablet mode, shown by the bottom image where the screen is completely covering the keyboard. Hall sensors are likely used in many devices, but this Chrome OS commit from August 18 is specifically for Nocturne:

nocturne: Turn on UHALL_PWR_EN by default. UHALL_PWR_EN needs to be enabled when the EC comes out of reset so that the top hall sensor is active when the EC boots.

That’s not a smoking gun, of course, but I find it a bit serendipitous when connecting the dots and based on the timing of the commit, the FCC testing, and the upcoming hardware event. Don’t forget that additionally, Nocturne will support a fingerprint reader as well as a detchable keyboard with pogo pins, and AEC or acoustic echo cancellation.

By the way, the HP device uses a Fibocom LTE module per the FCC test documents. We already know Google has recently filed for use of this module, but that could be coincidental. As far as supported frequencies that were tested for the HP convertible, there’s something for everyone: LTE Bands 2, 4, 5, 12, 13, 14, 17, 25, 26, 30, 38, 41, 66 as well as WCDMA Bands II, IV, and V.

Note that it’s entirely possible that this is simply a new HP convertible running Windows 10. A Windows variant of the X2, for example.

But I don’t think so.

I’m leaning — say with 75 percent confidence — towards Nocturne as an HP device made in partnership with Google to showcase an LTE capable detachable / convertible Chromebook. Indeed, such a device would coincide nicely with the new auto-switching between tablet and desktop mode in Chrome OS 70. And it may explain why we haven’t yet seen other configurations of the HP Chromebook X2.

5 thoughts on “An HP convertible with LTE might be the Nocturne Chromebook: A twist on the Chromebook X2

  • September 17, 2018 at 11:30 am

    Note the USB ports on the base. X2 has everything in the tablet body. This one seems like a convertible, not a detachable.

    • September 17, 2018 at 12:01 pm

      Yup, I saw the full-sized Type A ports. But pogo pins can send power and data, so it’s technically possible to add USB ports to the base that work with the attached display. In fact, that adds value: More ports when in laptop mode, which is when you’d need them.

      • September 17, 2018 at 12:04 pm

        Yeah, can imagine it working like that. For keyboard and mouse anyway, things like copying files would lead to bad UX. Just wanted to point out that it seems to be significantly different from X2 in that regard.

  • September 17, 2018 at 10:30 pm

    Think Sony VAIO Flip but with the tablet component entirely detachable from a base unit made up of keyboard and (2 x half screen height) stiff articulated panels. Physical joining of tablet and base might be magnetic or require simple physical insertion. Electrical connections could be via pogo pins.

    I think that there is ample information about strongly suggesting that Nocturne is a tablet. Whether the HP tablet shown here with its purpose built base unit is Nocturne seems to me to be a separate matter. Is there any information that ties down that connection? Also, perhaps a selection of standardised or specialised third party bases/keyboards could support Nocturne as some have argued.


  • September 18, 2018 at 12:21 pm

    I am using the HP Chromebook X2. I love the detachable keyboard as I use it in tablet mode 98% of the time. There is a problem with this model though and I would have probably questioned my purchase of it if I knew. HP does not sell the stylus. I haven’t tried any other aftermarket stylus, but who would sell a computer with a stylus when you can’t purchase the stylus in case it gets broken or lost? HP, that’s who.


Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.