The IP address 192.168.10.1 is typically used for accessing your router’s admin panel. If you’re connected to the same network as your router, this is the address you’ll enter into a browser to change your network settings.
Default Login Details for 192.168.10.1
Here are some of the most common default login credentials for 192.168.10.1:
IP Address | Username | Password |
192.168.10.1 | admin | admin |
192.168.10.1 | (blank) | admin |
192.168.10.1 | randomly generated | admin |
192.168.10.1 | admin | (blank) |
192.168.10.1 | admin | Motorola |
Steps to Access the Admin Panel of 192.168.10.1
To enter your router’s admin page through 192.168.10.1, follow these simple steps:
- Confirm that your router is powered on and the connection lights are stable (Power, WAN, LAN, and WLAN).
- Open any web browser.
- Enter http://192.168.10.1 into the address bar.
- Check for typing errors or a potential issue with your browser’s autocomplete if the page doesn’t load.
- If unsure of the correct IP address, you may need to verify it as described in another article.

How to Recover Username and Password for 192.168.10.1?
If you can’t remember your username or password, follow these steps to reset or recover them. Alternatively, refer to the default login credentials mentioned above.
Troubleshooting 192.168.10.1 Connection Issues
If you are having trouble connecting to 192.168.10.1, there may be a few reasons behind the problem:
- Incorrect IP Address: Even a single wrong digit or symbol can prevent access. To avoid errors, copy and paste the IP address.
- Missing Ethernet Cable: Some routers require an Ethernet cable to connect to the computer physically before accessing the admin page.
- Faulty Router: If the router isn’t functioning correctly, it may prevent you from connecting. If that’s the case, contact the manufacturer for support.
Role of 192.168.10.1 in Networking
The IP address 192.168.10.1 is used to configure network devices like routers, webcams, and VOIP phones.
It serves as the gateway to the router’s settings. This address helps configure local networks without accessing the global internet address.
192.168.10.1: A Private Network Address
The 192.168.10.1 IP address is private. Unlike public IP addresses, private ones don’t need to be registered with an IP address registry.
This means multiple devices on different private networks can use the same address without conflict.
Private IP addresses are ideal for home and local area networks, offering a secure way to manage your router.
How to Set Up a Router Using 192.168.10.1?
Here’s a quick guide to setting up your router:
- Disconnect your modem from the power supply.
- Connect an Ethernet cable from your modem to the router’s WAN port.
- Connect another Ethernet cable from the router’s LAN port to your computer.
- Power on the modem and the router.
- Switch the router’s power button to the ON position.
These steps will help you establish a connection to the router, making it ready for configuration.
By following these instructions, you can ensure smooth access to your router’s settings via 192.168.10.1 and make necessary configurations for your network.